[Logo] Anarduino and HopeRF Community Forum
  [Search] Search   [Recent Topics] Recent Topics   [Hottest Topics] Hottest Topics     [Groups] Back to home page 
[Register] Register / 
[Login] Login 
Hope RF which one used  XML
Forum Index » HopeRF
Author Message
claudebizier



Joined: 05/01/2016 10:11:46
Messages: 3
Offline

Hello

I look for a new application with wireless sensor. I need one master and some 4-6 slaves, distance about 30 meters indoor. I look HM-TRP module but it's seam to be work one on one !

So, Is somebody had ever make this application. Which module could be the best choice.

the module could pass FCC normes.

thanks for informations

claudebizier



Joined: 05/01/2016 10:11:46
Messages: 3
Offline

Answer:

The HM-TRP modules are only for transmiting and receiving data purpose. You can control them by your software to realize the work mode you want, LIKE STAR.

stevech



Joined: 07/07/2014 18:07:27
Messages: 91
Offline

claudebizier wrote:Hello

I look for a new application with wireless sensor. I need one master and some 4-6 slaves, distance about 30 meters indoor. I look HM-TRP module but it's seam to be work one on one !

So, Is somebody had ever make this application. Which module could be the best choice.

the module could pass FCC normes.

thanks for informations


What is being sensed? By what sort of sensor? At what rates?
claudebizier



Joined: 05/01/2016 10:11:46
Messages: 3
Offline

I just want to read analog value from 4-6 slaves, if the value is upper than (2v) the corresponding slave send the value to the master.

Also I want to cheek if the communication still work every 3 minutes.

 
Forum Index » HopeRF
Go to:   
Powered by JForum 2.1.9 © JForum Team