[Logo] Anarduino and HopeRF Community Forum
  [Search] Search   [Recent Topics] Recent Topics   [Hottest Topics] Hottest Topics     [Groups] Back to home page 
[Register] Register / 
[Login] Login 
RFM69HW stop working  XML
Forum Index » HopeRF
Author Message
mirmit



Joined: 05/11/2014 09:48:22
Messages: 8
Offline

I have a setup with a RFM69WH plugged on a Raspberry Pi. the system worked fine for about 2 years. Recently, I noticed the system were not able to transmit data. The data reception still work fine.

I swapped the RFM module with another one and this is able to transmit and receive messages. This leads me to eliminate SW or Raspberry issue.

Is there a way to figure out what went wrong, What could be the source of the issue?
DanaK6JQ



Joined: 17/11/2016 14:22:56
Messages: 3
Offline

What transmit power level are you running the RFM69WH at?

Dana K6JQ
mirmit



Joined: 05/11/2014 09:48:22
Messages: 8
Offline

The power isn't changed from default value. The very same Raspberry Pi and its software send fine with another tranceiver.
Opher1988


[Avatar]

Joined: 25/09/2017 06:05:06
Messages: 1
Location: Bloomburg, TX
Offline

Have you tried to replace to power module? The corruption of PM might affect data transmission as well. I recommend you to do that in case nothing else helps. And btw share the results so i can put it into my work since i'm currently trying to write my research papers. Peace out!
[WWW]
 
Forum Index » HopeRF
Go to:   
Powered by JForum 2.1.9 © JForum Team