[Logo] Anarduino and HopeRF Community Forum
  [Search] Search   [Recent Topics] Recent Topics   [Hottest Topics] Hottest Topics     [Groups] Back to home page 
[Register] Register / 
[Login] Login 
Messages posted by: kmac2001
Forum Index » Profile for kmac2001 » Messages posted by kmac2001
Author Message
That should be the correct config for the IDE.
One other issue with some FTDI boards is they dont have the DTR signal connected to the DTR/Reset pin so can not reset the board before it starts the upload.
On the first ones I bought I had to run a wire from the DTR signal on the board to the correct pin.
You might try swapping the Rx and Tx wires from the FTDI to the mini wireless.
I purchased some on Ebay that had these lines labled wrong.
 
Forum Index » Profile for kmac2001 » Messages posted by kmac2001
Go to:   
Powered by JForum 2.1.9 © JForum Team