[Logo] Anarduino and HopeRF Community Forum
  [Search] Search   [Recent Topics] Recent Topics   [Hottest Topics] Hottest Topics     [Groups] Back to home page 
[Register] Register / 
[Login] Login 
Messages posted by: gopherxx
Forum Index » Profile for gopherxx » Messages posted by gopherxx
Author Message

Rick had asked a few months ago to post some of what I had used my anarduino's to monitor. So here goes. I don't do forum and I'm definitely not a coder That will be obvious to those who are.

This relies on three parts:
python script to copy to emocms(runs on raspberry pi through a serial dump over usb to ftdi cable)

The below code allows my anarduino's to act as a network and update my emoncms page as specified. Basically I monitor my utility room Temp, Humidity, and Salt level in the softener. One anarduino acts as a broadcast node and the other acts as a gateway. I have a 3rd anarduino that monitors my barn environmental's and the door status.

disclaimer - The below code was built from various internet sources and by another friend of mine, as well as myself. I didn't have a spare anarduino to reupload and test the gateway code, but I'm 99% sure that is the final version i used.




Forum Index » Profile for gopherxx » Messages posted by gopherxx
Go to:   
Powered by JForum 2.1.9 © JForum Team