Hey,
I'm trying to program the MiniWireless with a FTDI USB to serial converter (FT232RL). Connecting the serial monitor works fine, but I can't get the programming to work. I've selected 'Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega328' in the Arduino IDE. The problem is with the auto reset after programming. I've connected the DTR pin on the FT232RL to the reset pin on the MiniWireless with a 0.1uF capacitor in between. This should work, but this 'hangs' the MiniWireless (keeps resetting). Any ideas? Thanks!
Regards,
Jeroen.
|