Anarduino and HopeRF Community Forum
Search
Recent Topics
Hottest Topics
Back to home page
Register
/
Login
Messages posted by: MikeD82
Forum Index
»
Profile for MikeD82
»
Messages posted by MikeD82
Author
Message
Anarduino
»
Problem Programming - Arduino IDE
»
Go to message
I am trying to program the Node example but receiving errors in the ide. The Anarduino reboots during the upload. I am using a windows machine to flash the board. I am selecting moteino board.
Arduino IDE Error:
avrdude: Version 6.3, compiled on Jan 17 2017 at 12:00:53 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ Copyright (c) 2007-2014 Joerg Wunsch System wide configuration file is "C:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf" Using Port : COM8 Using Programmer : arduino Overriding Baud Rate : 115200 avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x53 avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x74 avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x61 avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x72 avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x74 avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x75 avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x70 avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x2e avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x2e avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x2e avrdude done. Thank you. An error occurred while uploading the sketch
Serial console after reboot:
Startup... 128Mb SPI FLASH MEMORY RFID Block READ test..... 4D 01 80 31 30 83 FF FF FF FF FF FF FF 51 52 59 02 00 40 00 53 46 51 00 27 36 00 00 06 0A 08 0F 02 02 03 03 18 02 01 08 00 02 0F 00 10 00 FE 00 00 01 FF FF FF FF FF FF FF FF FF FF FF 50 52 49 31 33 21 02 01 00 08 00 01 03 00 00 07 01 41 4C 54 32 30 00 10 53 32 35 46 4C 31 32 38 53 41 42 3F 3F 49 31 30 80 01 F0 84 08 85 2D 8A 64 75 2D 7A 64 88 04 0A 01 00 01 8C 06 96 01 23 00 23 00 90 56 06 0E 46 43 03 13 0B 0C 3B 3C 6B 6C BB BC EB EC 32 03 00 00 00 00 00 00 00 00 04 00 02 01 50 00 FF FF 00 08 00 08 00 08 04 00 02 04 5A 01 FF FF 00 08 00 08 00 08 04 00 02 04 6C 02 FF FF 00 08 00 08 00 08 04 01 02 04 85 02 FF FF 00 08 FF FF FF FF FF FF FF FF 94 01 10 98 01 00 9A 2A 05 08 46 43 0D 0E BD BE ED EE 32 03 04 02 02 05 01 03 42 00 04 02 02 04 01 06 42 01 04 04 02 05 01 07 42 02 04 05 02 06 01 08 F0 0F FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF A5 80 E7 FF F3 FF FF FF FF 07 44 EB 08 6B 08 3B 80 BB EE FF FF FF FF FF FF FF FF FF FF FF 0C 20 10 D8 12 D8 00 SPI Flash Read 32bytes, starting at Address 0x20 (after sector erase, should be all FF's) FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF SPI Flash pattern Write 32B at Address 0x20 SPI Flash Read back 32bytes at Address 0x20 (should be 00 to 1F) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F memIdAvg: 58 mfgId=FF deviceId=17 jedecId=12018 Clear first 16bytes of RTC static ram, read back, write pattern/read back 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F setting new sleep time: 5-sec. t=978307788 tm1=31 1 2 1 0 9 48 tA=978307793 0-6: 49 09 00 02 01 01 00 (rtc time) 0-5: 53 09 00 02 01 01 (alarm0 time) going to sleep... Processing... waking up... GOT HERE!!! RTC alarm0 interrupt is working...............
Forum Index
»
Profile for MikeD82
»
Messages posted by MikeD82
Go to:
Select a forum
Anarduino
HopeRF
Projects
Powered by
JForum 2.1.9
©
JForum Team