Anarduino and HopeRF Community Forum
Search
Recent Topics
Hottest Topics
Back to home page
Register
/
Login
Messages posted by: haqthat
Forum Index
»
Profile for haqthat
»
Messages posted by haqthat
Author
Message
Anarduino
»
MiniWireless sleep mode power consumption
»
Go to message
empeka wrote:
I'm pretty sure your flash's manufacturer id is not 0.
Fix this and you should be fine
That seems to have been it.
changed to:
SPIFlash flash(5);
and it worked.
.04ma during sleep now.
Anarduino
»
MiniWireless sleep mode power consumption
»
Go to message
Additionally trying to sleep the flash seems to lock up the board.
All Serial output stops even if I try to init the flash.
The best I've been able to achieve so far is .4mA by sleeping the radio and the mc
Any ideas?
// put flash memory to sleep // Anarduino: Flash SPI_CS = 5, ID = 0xEF30 (Winbond 4Mbit flash) SPIFlash flash(5, 0); // flash(SPI_CS, MANUFACTURER_ID) if (flash.initialize()) { DEBUGln("Flash Init OK!"); flash.sleep(); // put flash (if it exists) into low power mode DEBUGln("Flash sleep"); } else { DEBUGln("Flash Init FAIL!"); }
Anarduino
»
MiniWireless sleep mode power consumption
»
Go to message
I have desoldered the pull-up resistor as mentioned, but I still see .40ma current draw.
I am doing a:
RadioHead library: radio.sleep();
LowPower library: LowPower.powerDown(SLEEP_FOREVER, ADC_OFF, BOD_OFF);
That's as low as I can get my board to go, it has a rfm69 on it.
What could I be doing wrong?
Forum Index
»
Profile for haqthat
»
Messages posted by haqthat
Go to:
Select a forum
Anarduino
HopeRF
Projects
Powered by
JForum 2.1.9
©
JForum Team